Table of Contents
Advertisement
Chapter 13
2. Set the current
Date
3. Set the current
Time
4. Click Save.
¾ To set up Daylight Saving Time:
1. Select
Enable Daylight Saving
2. Select the correct
time zone.
3. Select the correct
time zone.
4. Click Save.
13. 2. Control LEDs
The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. In the
LED Control
(In
MM/DD/YYYY
format).
(In
HH/MM/SS
format).
Time.
Start
date and time when daylight saving time starts at your local
End
date and time when daylight saving time ends at your local
System Tools
>
System
section, tick the
Enable Night Mode
Parameters.
checkbox.
Manage the Router
71
Advertisement
Table of Contents
