Polygroup SUMMER WAVES ST1100 Owner's Manual page 13

15. Continue to turn the CAM-HANDLE to tighten the jaw until no
more turns can be made. Align the CAM-HANDLE with the
Clamp and push the CAM-HANDLE toward the Sand
7
Tank .
2
17. Connect the Short hose
14
and the 6-Port Valve Inlet. Tighten the Hose Clamp
with a flat blade screwdriver.
6-Port Valve Inlet
15
14
15
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
CAM-HANDLE
between the Pump Outlet
15
Pump Outlet
MST. Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
16. Insert the CAM-SHAFT Bolt Cap
18. The sand filter pump is now fully assembled. Connect the sand filter
pump to the pool with the Long Hoses
Connect the pool Outlet to the Pump Inlet. And tighten the Hose
Clamp with a flat blade screwdriver. Connect the 6-Port Valve
15
Outlet to the pool Inlet Port. Tighten the Hose Clamp
blade screwdriver.
6-Port Valve Outlet
15
13
15
Pump inlet
to the end of the CAM-BOLT.
8
8
supplied with the pump.
13
with a flat
15
Inlet Port
15
Outlet Port
13
15
13