Polygroup SUMMER WAVES ST1100 Owner's Manual

Polygroup SUMMER WAVES ST1100 Owner's Manual

For above ground swimming pools, 10"/12"
Hide thumbs Also See for SUMMER WAVES ST1100:

Advertisement

SUMMER WAVES
SAND FILTER PUMP
READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Should you encounter a problem with your Polygroup
to Polygroup
. For any setup and troubleshooting issues, please visit support.polygroupstore.com. You may be asked to return all or parts of the product for inspection
®
and/or repair. Do not return any products to Polygroup
Polygroup
Trading Limited, (hereinafter "Polygroup
®
for 180 days from the date of purchase. Original Purchaser must retain proof of such purchase in the form of an original store sales receipt and must produce
such upon request by Polygroup
®
applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in Polygroup
Consequential damages, including claims for loss of water, pool chemicals, damage, or labor are not covered under this Limited Warranty. This Warranty will be
declared invalid should the Purchaser modify or repair the product themselves or by unauthorized persons; use non-Polygroup
product; use the product in contravention of the manufacturer's Instructions; use improper voltage; abuse the product in any way; or through accident or
negligence. Normal wear-and-tear is not covered under this Warranty, nor are acts of God outside the control of Polygroup
responsible for grasses that may grow through the ground cloth and/or pool liner, as this is not a manufacturing defect.
IN NO EVENT SHALL Polygroup
PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or others jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
FOR ABOVE GROUND SWIMMING POOLS
ST1100 (10") / ST1600 (12") Models
product, please DO NOT return the product to the place of purchase. All warranty claims must be made directly
®
without a Return Merchandise Authorization number.
®
LIMITED WARRANTY
") warrants to the original purchaser only, the Sand Filter Pump against defects in material and workmanship
®
or its designated agents. Warranty claims cannot be processed without a valid proof of purchase. This Limited Warranty
, THEIR AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER OR ANY OTHER
®
DISTRIBUTED BY: Polygroup
Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong
OWNER'S MANUAL
instructional video on
setting up the sand filter
pump and pairing it with
the pool, please visit
www.polygroupstore.com
®
Trading Limited
®
®
NOTE: For the
's sole discretion.
®
parts or accessories with the
®
. Polygroup
will not be held
®

Advertisement

Table of Contents
loading

Summary of Contents for Polygroup SUMMER WAVES ST1100

  • Page 1 Warranty claims cannot be processed without a valid proof of purchase. This Limited Warranty ® applies only to the original purchaser of the product and is limited solely to the repair or replacement of the product, to be decided in Polygroup ’s sole discretion.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Warnings ................................. 3 ~ 6 Preliminary steps, & Sand pump power information & Part list ............... 7 ~ 8 Setup instructions ............................9 ~ 13 Use of pump ..............................14 ~ 15 Pump motor care & Pump maintenance & Pool water care ................16 Troubleshooting guide ...........................
  • Page 3: Warnings

    WHEN INSTALLING A POOL, IN ORDER TO COMPLY WITH STATE OR LOCAL LAWS REGARDING FENCING AND OTHER SAFETY REQUIREMENTS. CUSTOMERS SHOULD CONTACT THEIR LOCAL BUILDING CODE ENFORCEMENT OFFICE FOR FURTHER DETAILS. POLYGROUP IS NOT RESPONSIBLE FOR ANY ADDITIONAL EXPENSES THAT YOU MAY INCUR.
  • Page 4 7. WARNING! Do not use the filter pump when pool is empty. This pump is designed only for dismount able storable pools above the ground, not for permanently installed pools. Improper use may lead to overheating and permanent damage of the product. 8.
  • Page 5 Turn on the pump for the recommended hours daily. If you are unsure of the time frames please refer to support.polygroupstore.com for the recommended Pump Operation Hours based on pool types and sizes. Clean and replace Sand frequently. Replace only with genuine Polygroup / SUMMER WAVES Brand Sand tank.
  • Page 6 10. Do not use the filter pump during severe weather conditions, i.e. electrical storms, tornadoes, etc. 11. Be aware of overhead power lines when vacuuming your pool or using a telescoping pole. 12. Check regularly for signs of wear or loose bolts that could make the deck unsafe. 13.
  • Page 7: Preliminary Steps, & Sand Pump Power Information & Part List

    5. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) “Swimming Pools, Fountains and Similar Installations” or its latest approved edition. 6. The Pump are manufactured by Polygroup and ETL control number 4000608 and 4006317 - double insulated and grounded - 220-240 V.A.C - 50Hz.
  • Page 8 Sand Specifications: Fill the tank with #20 silica sand ONLY. You can purchase the sand from your local home improvement or building material stores. WARNING: Using the incorrect sand may damage the filtration system and will void the warranty. RETURN FITTING SET SUCTION FITTING...
  • Page 9: Setup Instructions

    OWNER’S MANUAL SETUP INSTRUCTIONS Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. WARNING: CLIMBING HAZZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTRATION SYSTEM TO GAIN ACCESS TO THE POOL. Tools required: Flat-blade screwdriver (not included) 1.
  • Page 10 6. With the Drain Valve of the Sand Tank pointing outwards, 5. Insert and push the Lock Pins all the way down to secure the Pump to the Sand Tank Base place the Sand Tank onto the Sand Tank Base PUSH Drain Valve ALIGN...
  • Page 11 OWNER’S MANUAL 9. Fill the tank with #20 silica sand ONLY. You can purchase the 10. Remove the Sand Guard and save for future use. sand from your local home improvement or building material stores. Slowly pour sand into the Sand Tank until the sand level is between the Min and Max marks on the Center Pipe Sand...
  • Page 12 12. Place the Clamp around the flange of the 6-Port Valve 13. Close the Clamp by pushing the two jaws as close together and Sand Tank as possible. IMPORTANT: Align the hinge on the Clamp with the ridge on the flange of the 6-Port Valve PUSH The hinge of Clamp aligned with the ridge of 6-Port Valve...
  • Page 13 OWNER’S MANUAL 17. Connect the Short Hose between the Pump Outlet and the 16. When the Clamp is tightened and no more turns can be 6-Port Valve Inlet. Tighten the Hose Clamps with a flat-blade made, flip and push the Cam Handle towards the Sand Tank to secure.
  • Page 14: Use Of Pump

    USE OF PUMP Before using the Pump IMPORTANT: 1. Make sure to press the pump power switch to OFF before plugging the Power Cord Set into a power outlet. 2. Always PRESS DOWN the 6-Port Valve Handle BEFORE switching handle positions. 3.
  • Page 15 OWNER’S MANUAL USE OF PUMP 1. Make sure the pump is switched OFF. 2. Plug the Power Cord Set to a grounded receptacle at least 15 feet (4.5m) away from the pool. Press the RESET button to start the pump. 3.
  • Page 16: Pump Motor Care & Pump Maintenance & Pool Water Care

    PUMP MOTOR CARE IMPORTANT! This Sand Filter Pump is protected by a thermal switch, a safety device that stops the pump from running when it's overheated, to prevent pump damage and prolong service life. If your pump turns off automatically, it’s likely the pool water temperature is too high or the water flow through the pump is insufficient for cooling the pump down.
  • Page 17: Troubleshooting Guide

    OWNER’S MANUAL TROUBLESHOOTING GUIDE WARNING: TURN OFF THE PUMP AND UNPLUG THE POWER CORD BEFORE TROUBLESHOOTING THE FILTER PUMP. Problem Cause Solution A. The Pump not plugged in OR the A. The Set must be plugged into a grounded power outlet. Then press the RESET button to start the Pump.
  • Page 18: Replacement Parts Ordering Information & Sand Filter Pump Disassembly & Storage

    REPLACEMENT PARTS ORDERING INFO ST1100 ST1600 ST1100 ST1600 Key# Description Key# Description PART # PART # PART # PART # P58PP2884A09 P58PP1782E09 P58284283W05 P58284283W05 P582842838UN P582842838UN P58PP28848UN P58PP17828UN Suction Fitting (SF) Sand Tank Base P582842837CN P582842837CN P58PP28847CN P58PP17827CN P58PF1510P01 P58PF1510P01 P58000001W05 P58000000W05 Sand Tank...
  • Page 19: 6-Port Valve Part List

    OWNER’S MANUAL 6-PORT VALVE PARTS LIST Wrench Locking Ring Valve Handle Valve Gasket Top Cover O-Ring Pressure Gauge Drain Indicator Valve Housing Drain Indicator Gasket Valve Grate Gasket...
  • Page 20: 6-Port Valve Setup

    6-PORT VALVE SETUP 1. Using the Wrench, twist counterclockwise to loosen and remove the Locking Ring. 2. Fit the Gasket in place. 3. Insert the Top Cover O-Ring into the groove of the Valve Housing. Top Cover O-Ring Valve Gasket Valve Housing...
  • Page 21 OWNER’S MANUAL OWNER’S MANUAL 4. Insert the Valve Handle into the Valve Housing. Make sure that the key aligns with the keyway. 5. Place the Locking Ring over the Valve Housing. 6. Tighten the Locking Ring with the Wrench. Locking Ring...
  • Page 22: Customer Services Contact

    Email: service@rms-gruppe.de Telephone: +61 (0) 398 970 700 Australia and Islands Email: contact@SlumberTrek.com.au Telephone: 1-888-919-0070 (from 8AM to 5PM MST, Monday-Friday) United States, Canada and Mexico Email: warranty@polygroup.com Website: support.polygroupstore.com support.polygroupstore.com For answers to most frequently asked questions, please visit...

This manual is also suitable for:

Summer waves st1600

Table of Contents