Polygroup SUMMER WAVES ST1100 Owner's Manual page 12

11. Apply the Clamp to the flange of the 6-Port Valve
7
and the Sand Tank .
2
IMPORTANT: Align the hinge on the Clamp
ridge on the flange of the 6-Port Valve
7
ALIGN
13. Turn the CAM-HANDLE so that the CAM-BOLT is inserted
into the slot on the other jaw.
CAM-HANDLE
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
12
10
with the
7
.
10
10
2
CAM-BOLT
MST. Extended operating days and hours during peak season requirements.
12. C lose the Clamp 7 by pushing the 2 jaws as close together as
7
possible.
14. Hold the CAM-HANDLE with one hand and start turning in
a clockwise direction.
PUSH
7
CAM-HANDLE