Table of Contents
Advertisement
WARNING!
• Do not start or run an engine in a closed
garage or confined area. Exhaust gas con-
tains Carbon Monoxide (CO) which is odor-
less and colorless. Carbon Monoxide is poi-
sonous and can cause serious injury or death
when inhaled.
• Keep key fobs away from children. Opera-
tion of the Remote Start System, windows,
door locks or other controls could cause se-
rious injury or death.
To Enter Remote Start Mode
Push and release the Remote Start button on the
key fob twice within five seconds. The vehicle doors
will lock, the turn signals will flash twice, and the
horn will chirp twice. Then the vehicle will start, and
the vehicle will remain in the Remote Start mode for
a 15-minute cycle.
NOTE:
• The vehicle can be started two consecutive times
(two 15-minute cycles) from the key fob. However,
the ignition must be placed in the ON/RUN posi-
tion before any additional remote start requests
can be received.
• The park lamps will turn on and remain on during
Remote Start mode.
• For security, power window operation is disabled
when the vehicle is in the Remote Start mode.
General Information
The following regulatory statement applies to all
radio frequency (RF) devices equipped in this ve-
hicle:
This device complies with Part 15 of the FCC Rules
and with Industry Canada license-exempt RSS stan-
dard(s). Operation is subject to the following two
conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference re-
ceived, including interference that may cause
undesired operation.
NOTE:
Changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
VEHICLE SECURITY
ALARM — IF EQUIPPED
The vehicle security alarm monitors the vehicle
doors for unauthorized entry and the ignition switch
for unauthorized operation. When the alarm is acti-
vated, the interior switches for door locks, power
sliding doors and power liftgate are disabled. The
vehicle security alarm provides both audible and
visible signals. If something triggers the alarm, the
vehicle security alarm will provide the following au-
dible and visible signals: the horn will pulse, the park
lamps and/or turn signals will flash, and the vehicle
security light in the instrument cluster will flash.
To Arm The System
Follow these steps to arm the vehicle security alarm:
1. Make sure the vehicle's ignition is cycled to the
"OFF" position (refer to "Starting The Engine"
in "Starting And Operating" for further
information).
25
Advertisement
Table of Contents
