Table of Contents
Advertisement
NOTE:
The adjustable upper shoulder belt anchorage is
equipped with an Easy Up feature. This feature
allows the shoulder belt anchorage to be adjusted in
the upward position without pushing or squeezing
the release button. To verify the shoulder belt an-
chorage is latched, pull downward on the shoulder
belt anchorage until it is locked into position.
WARNING!
• Wearing your seat belt incorrectly could make
your injuries in a collision much worse. You
might suffer internal injuries, or you could
even slide out of the seat belt. Follow these
instructions to wear your seat belt safely and
to keep your passengers safe, too.
• Position the shoulder belt across the shoulder
and chest with minimal, if any slack so that it is
comfortable and not resting on your neck.
The retractor will withdraw any slack in the
shoulder belt.
• Misadjustment of the seat belt could reduce
the effectiveness of the safety belt in a crash.
• Always make all seat belt height adjustments
when the vehicle is stationary.
100
Second Row Center (If Equipped) And Third
Row Center Seat Belt Operating Instructions
The second row center (if equipped) and third row
center seat belts feature a seat belt with a mini-latch
plate and buckle, which allows the seat belt to de-
tach from the lower anchor when the seat is folded.
The mini-latch plate and regular latch plate can
then be stored out of the way in the headliner for
added convenience to open up utilization of the
storage areas behind the front seats when the seat is
not occupied.
1. Remove the mini-latch plate and regular latch
plate from its stowed position in the headliner
slightly behind the second or third row seat.
Mini-Latch Stowage
2. Grasp the mini-latch plate and pull the seat belt
over the seat.
3. Route the shoulder belt to the inside of the left
head restraint.
4. When the seat belt is long enough to fit, insert
the mini-latch plate into the mini-buckle until
you hear a "click."
Advertisement
Table of Contents
