Table of Contents
Advertisement
Automatic Climate Control Descriptions
Icon
MAX A/C Button
Press and release to change the current setting, the indicator illuminates when MAX A/C is on. Performing this function again will cause
the MAX A/C operation to switch into manual mode and the MAX A/C indicator will turn off.
NOTE:
The MAX A/C setting is only available on the touchscreen.
A/C Button
Press and release to change the current setting, the indicator illuminates when A/C is on.
Recirculation Button
Press and release this button to change the system between recirculation mode and outside air. Recirculation can be used when outside
conditions such as smoke, odors, dust, or high humidity are present. Recirculation can be used in all modes. Recirculation may be unavail-
able (button on the touchscreen greyed out) if conditions exist that could create fogging on the inside of the windshield. The A/C can be
deselected manually without disturbing the mode control selection. Continuous use of the Recirculation mode may make the inside air
stuffy and window fogging may occur. Extended use of this mode is not recommended.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this function will cause the
system to switch between manual mode and automatic modes.
Refer to "Automatic Operation" within this section for more information.
Front Defrost Button
Press and release to change the current airflow setting to Defrost mode. The indicator illuminates when this feature is on. Air comes from
the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase. Use Defrost mode
with maximum temperature settings for best windshield and side window defrosting and defogging. Performing this function will cause the
ATC to switch into manual mode. If the front defrost mode is turned off the climate system will return the previous setting.
50
Description
Advertisement
Table of Contents
