Setting The Lcd Backlight; Activating Sleep Mode - GE DigitalFlow GF868 Programming Manual

2.7 Setting the LCD Backlight

Use the submenu to specify the number of minutes the LCD display backlight remains on before it is
BACKL
automatically turned off. Press the appropriate side of the
screen, then proceed as follows:
Note: For this discussion, it is assumed that the left pane of the display screen is active. If the right pane is active,
replace the
[F1]-[F4]
1. To access the Display Menu, press the
2. Press [ and =
[F2]
3. Use the numeric keys to enter a value from 1 to 60 minutes and press
enter a value of 0 and press
The Model GF868 will automatically return to the previous data display screen and the programmed backlight time-out
interval will begin.
If no entries are made from the keypad before the backlight time-out interval expires, the backlight will automatically
be turned off. At the next keypad entry, the backlight will be turned on and the specified time-out interval will begin
again.

2.8 Activating Sleep Mode

During times when the display is not in use, use the
allows the Model GF868 to process data more quickly. Press the appropriate side of the
desired pane of the display screen, then proceed as follows:
Note: For this discussion, it is assumed that the left pane of the display screen is active. If the right pane is active,
replace the
[F1]-[F4]
1. To access the Display Menu, press the
2. Press [ and =
[F3]
3. To reactivate the display and return to the previous data screen, press any key on the keypad. The Model GF868
will automatically return to the previous data display screen.
Note: With
as the selected display format, exiting
BIG
screen will be superimposed on the message. If this occurs, simply enter the
format to refresh the screen. See the instructions earlier in this chapter.
DigitalFlow™ GF868 Programming Manual (1-Channel)
keys designations by the
[DISP]
.
BACKL
.
[ENT]
keys designations by the
[DISP]
. The message "
SLEEP
LCD SLEEP MODE -Press any key. . ."
[SCREEN] key to activate the desired pane of the display
keys.
[F5]-[F8]
key.
submenu to temporarily suspend LCD display activity, which
SLEEP
keys.
[F5]-[F8]
key.
mode may not erase the sleep mode message and the data
SLEEP
Chapter 2. Displaying Data
[ENT] . To keep the backlight on constantly,
key to activate the
[SCREEN]
appears.
DISP menu and reselect the BIG
47