Activating/ Deactivating The Alarm; Stopping The Alarm/ Snooze Function; Further System Settings; Equaliser - Hama IR40MBT Operating Instructions Manual

Enable:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Date and time:
If you selected Once, enter the date and time for the
one-off alarm.
Time:
First choose the hour, then the minute at which the
alarm is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(Buzz), or by the Internet radio.
Preset:
If you selected Internet radio, choose which station or
podcast you wish to be woken with. You can choose any
of the 30 favourite station slots or the Last listened.
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Save:
Confirm this menu item to complete your alarm settings.
Note
• When using Internet radio for the alarm sound
take care that the internet connection will be
available at the time of the alarm. If no internet
connection is available the radio instead uses the
wake-up buzzer (Buzz).
• It is recommended to allow the radio to update
the time automatically. This ensures that the time
is always correct even if there is a separation of power
supply – for example a power cut.

14.2 Activating/ deactivating the alarm

• Confirm the menu item Save in alarm settings to
activate the alarm.
• Disable the alarm by setting the Mode: to Off.

14.3 Stopping the alarm/ Snooze function

• When the alarm activates, press [ ]/[ ] to
stop the alarm.
• The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
• If the alarm is not stopped, the radio automatically
switches into standby mode after one hour.
• Hold the [VOLUME/ENTER/NAVIGATE] button down to
finally stop the alarm.

15. Further system settings

You can modify all settings and access important
information about the radio in the System settings.

15.1 Equaliser

The equaliser allows you to adjust the sound of the
radio to suit your preferences by amplifying or reducing
the amount of bass or treble in the audio .You can choose
from preconfigured profiles, adjusted to suit a variety of
music Genres, or create your own custom profile.
• To set the Equaliser, proceed as follows:
Press and hold
16
[ ] [ ]
System settings

Equaliser