Alarms; Alarm Settings; Activating/ Deactivating The Alarm - Hama IR150MBT Operating Instructions Manual

Hide thumbs Also See for IR150MBT:
Table of Contents

Advertisement

14. Alarms

The Radio has two individually adjustable alarm times.

14.1 Alarm settings

• Alarm 1 and alarm 2 are confi gured identically. So you
can save two different alarm times. Select alarm 1 or
2 and then make the following settings by means of
[ENTER/NAVIGATE]:
Enable:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Date and time:
If you selected Once, enter the date and time for the
one-off alarm.
Time:
First choose the hour, then the minute at which the alarm
is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(Buzz), by the Internet radio.
Preset:
If you selected Internet radio/ DAB/ FM, choose which
station or podcast you wish to be woken with. You can
choose any of the 30 favourite station slots or the Last
listened.
Volume:
[ ]
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Save:
Main menu
Confirm this menu item to complete your alarm settings.
Alarms

14.2 Activating/ deactivating the alarm

• Confirm the menu item Save in alarm settings to activate
• Disable the alarm by setting the Mode: to Off.
21
Note
• When using Internet radio for the alarm sound take
care that the internet connection will be available
at the time of the alarm. If no internet connection is
available the radio instead uses the wake-up buzzer
(Buzz).
• It is recommended to allow the radio to update the
time automatically. This ensures that the time is
always correct even if there is a separation of power
supply – for example a power cut.
Note – Alarm/multi-room
• When using and setting the alarm function on a
device that belongs to a multi-room group, please
note that this device automatically leaves the group at
the time of the alarm.
• This behaviour prevents activation of the alarm on all
devices that belong to the group.
• The device in question does not automatically rejoin
the group after the alarm has been stopped, but must
be added manually.
the alarm.

Advertisement

Table of Contents
loading

Table of Contents