Alarm; Settings; Activating / Deactivating The Alarm; Stopping The Alarm / Snooze Function - Hama DR35 Operating Instructions Manual

11. Alarm

The radio has two individually adjustable alarm times.

11.1 Settings

• Alarm 1 and alarm 2 are configured identically and
allow two separate alarm times to be saved. Switch off
alarm 1 or 2 - by pressing and holding [ALARM] 1 (6)
or [ALARM] 2 (7) or using the system settings.
Confirm the selection by pressing [OK].
Activation / deactivation:
Select On to activate the alarm and to make the alarm
settings.
Select Off to deactivate the alarm.
Confirm the selection by pressing [OK].
Time:
First choose the hour, then the minute at which the alarm
is to activate.
Confirm the selection by pressing [OK].
Mode:
Choose when the alarm is to activate:
 Daily – Once – Weekdays – Weekends
Confirm the selection by pressing [OK].
Date:
If you selected Once, enter the date for the one-off alarm.
Confirm the selection by pressing [OK].
Buzzer / DAB / FM:
Set whether you wish to be woken by an alarm tone
(Buzzer), by DAB or by FM.
Confirm the selection by pressing [OK].
Programme:
If you selected DAB/ FM, choose which station you wish
to be woken with. You can choose any of the 30 preset
slots or the Last listened.
Confirm the selection by pressing [OK].
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Confirm the selection by pressing [OK].
Note
It is recommended to allow the radio to update the
time automatically. This ensures that the time is always
correct even if there is a separation of power supply –
for example a power cut.
Following successful activation, the alarm symbol (alarm 1
or alarm 2) appears at the right-hand edge of the screen.

11.2 Activating / deactivating the alarm

To activate / deactivate the alarm, proceed as follows:
• Select alarm 1 or 2 - by pressing hand holding [ALARM]
1 (6) or [ALARM] 2 (7) or using the system settings.
• Confirm the selection by pressing [OK].
• Select ON to activate the alarm and to make the alarm
settings. Confirm the selection by pressing [OK].
• Select OFF to deactivate the alarm. Confirm the selection
by pressing [OK].

11.3 Stopping the alarm / Snooze function

• When the alarm activates, press [ ] to stop the alarm.
• Press [ ] to activate snooze. (See 11.4 Setting
snooze)

11.4 Setting snooze

• The radio has a snooze function that retriggers the alarm
once a selected time period has elapsed.
To set the time period, proceed as follows:
• Press [ ] to access the menu.
• Select "System settings" and confirm your selection
with [OK].
• Select "Snooze" and define the required time period
(5/10/15/20/30/45/60 minutes). Confirm your entry
with [OK].
• Pressing [BACK] takes you back to the playback screen.

12. Timer/Sleep

The radio has a timer function, which switches the radio
to standby mode after a pre-defined length of time.
• Press [ ] to set the required time period
(5/10/15/30/45/60 minutes) using [Volume -/+].
• Confirm your entry with[OK].
9