Table of Contents
Advertisement
10. Alarm clock
The radio has two individually adjustable alarm times.
10.1 Settings
You can access the alarm settings as follows:
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER] to navigate to the menu item
"Main menu" -> "Routine" -> "Alarm clock".
Alarm 1 and alarm 2 are configured identically and allow
two separate alarm times to be saved. Choose Alarm 1
or 2 and confirm your selection by pressing [NAVIGATE/
ENTER].
Set the following details using [NAVIGATE/ENTER].
Repeat:
Choose when the alarm is to activate:
Off – Daily – Once – Weekdays – Weekends
Alarm time:
First choose the hour, then the minute at which the alarm
is to activate.
Source:
Set whether you wish to be woken by an alarm tone
(Buzzer), by DAB or by FM.
Preset:
If you selected DAB/ FM, choose which station you wish to
be woken with. You can choose any of the 30 preset slots
or the Last listened.
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Saving:
Select Off / On to complete your alarm settings.
Note
It is recommended to allow the device to update the
time automatically. This ensures that the time is always
correct even if there is a separation of power supply – for
example a power cut.
10.2 Activating / deactivating the alarm
• Activate the alarm by confirming the settings with Alarm
on.
• Disable the alarm by setting the Mode: to "Alarm off".
10.3 End alarm
• When the alarm activates, press [POWER/VOLUME] to
end the alarm.
11. Other system settings
11.1 Time/ Date settings
To access the time settings, proceed as follows:
• Press [ ] (4) to access the Settings menu.
• Use [NAVIGATE/ENTER] (9) to navigate to the menu
item "Settings" -> "System settings"
-> "Time/date"
• Confirm the selection by pressing [NAVIGATE/ENTER].
• Use [NAVIGATE/ENTER] to navigate to the "Automatic
update" menu item.
Auto update
Update from DAB / FM
If automatic time and date adjustment is activated, the
device receives time and date information from the station
over the FM/DAB/DAB+ radio network. This is the best way
to ensure that the clock will run accurately and the alarm
will trigger at the correct time, even after power outages.
No update
The time and date (DD-MM-YYYY) must be set manually;
no automatic calibration takes place.
Time/ Date settings
Set the date (DD-MM-YYYY) and time (hh:mm) manually
using [NAVIGATE/ENTER].
Set format
Choose between 12 and 24 hours format.
10
Advertisement
Table of Contents
