View Settings; Network Profile; Keep Network Connected; Time/ Date - Hama IR40MBT Operating Instructions Manual

15.2.4 View settings

Here you can find all the most important information
about all network connections currently used or configured
on the radio, such as: MAC address, WLAN region, DHCP
active/ disabled, SSID, IP address, subnet mask, gateway
address, DNS (primary and secondary), etc.
Press and hold

15.2.5 Network profile

The radio automatically saves all successfully connected
network profiles.This means that re-establishing these
connections (for example, after the radio was disconnected
from the power supply) does not require you to re-enter
the network access information.
• To remove network profiles individually, proceed
as follows:
Press and hold
• Select a network profile and press
[VOLUME/ENTER/NAVIGATE] to delete it.
• Confirm the prompt querying if you want to
delete the profile with YES.
• A profile that is currently active, or that is in
use, cannot be deleted.
[ ] [ ]
System settings

Network

View settings
[ ] [ ]
System settings

Network

Network profile
19
Note - Data security
• Before giving or selling the radio to someone else,
we recommend performing a Factory Reset.
• This will completely and permanently delete all
network information and connections stored on
the device.

15.2.6 Keep network connected

This setting is a radio energy-saving function.
Press and hold
If this feature is disabled (NO#), the network module will
be switched off whenever the radio is not actively using the
network connection (such as in standby mode). This means
the radio will not be accessible via the network from your
PC, smartphone or tablet. You should enable (YES #)
this menu item if you want to use streaming or control
functions via the app. This function is disabled by default.

15.3 Time/ Date

To access the time settings, proceed as follows:
Press and hold
[ ] [ ]
System settings

Network

Keep network connected
[ ] [ ]
System settings

Time/ Date