Activating/Deactivating The Alarm; Activating/Deactivating The Alarm In Standby Mode; Stopping The Alarm/Snooze; System Settings - Hama DR1610BTS Operating Instructions Manual

Hide thumbs Also See for DR1610BTS:
Table of Contents

Advertisement

12.2 Activating/deactivating the alarm

• Select alarm 1 or 2 by repeatedly pressing [alarm] or by
turning [enter/navigate] and the option Alarm on/Alarm
off to activate or deactivate the selected alarm (1/2).
• The alarm icon
/
is displayed when the alarm
1
2
function is activated.
12.3 Activating/deactivating the alarm in standby
mode
• Press [alarm] in standby mode to display the current
alarm setting.
• Press [alarm] again or turn [enter/navigate] to activate/
deactivate alarm 1 and/or alarm 2.
• Press [enter/navigate] to confirm your settings.

12.4 Stopping the alarm/snooze

• When the alarm sounds, press [volume -/+] /
• [ ] to stop the alarm.
• Repeatedly press [SNOOZE] on the remote control to
activate the snooze function.
• The alarm turns off for the selected time interval (5/10
minutes) before activating once again.
• If the alarm is not stopped, the radio automatically
switches to standby mode after the preset time interval
(duration).

13. System settings

In the system settings, you can configure all settings and
access important information about the radio.

13.1 Equaliser

The equaliser allows you to adjust the sound of the radio
to suit your preferences by amplifying or reducing the
amount of bass or treble in the audio.
You can choose from preconfigured profiles, adjusted to
suit a variety of music genres, or create your own custom
profile.
• To change the equaliser settings, proceed as follows:
• Use [enter/navigate] to choose one of the preconfigured
profiles.
• To create your own equaliser profile, choose the option
My EQ... .
• This opens the Bass and levels settings.
• To change a value, press [enter/navigate] on your
selected setting and change the values by turning [enter/
navigate] to the left or right. If playback is already
started when you modify these settings, you can hear the
changes in the audio immediately.
• Confirm your settings by pressing [enter/navigate] again.
• After configuring all the settings, press [menu] on the
radio and confirm the settings.
13
[menu]
System
Equaliser

Advertisement

Table of Contents
loading

Table of Contents