Connecting A Satellite Receiver - Sony KE-32TS2U, KE-42T2U Operating Instructions Manual

Connecting a Satellite Receiver

AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's SATELLITE
IN jack.
2
Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
3
Connect the supplied 75-ohm coaxial cable from your cable or antenna to the
TV's VHF/UHF jack.
Rear of TV
VIDEO IN 1
R AUDIO L VIDEO S VIDEO
R AUDIO L
R AUDIO L
VIDEO IN 2
S VIDEO
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
Tip
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead
of the S VIDEO cable.
Installing and Connecting the TV
VIDEO IN 3 AUDIO OUT
R L
DVI-HDTV
CONTROL
S IN
Y/G P /B P /R HD VD
B R
OUT
SUB
VIDEO IN 4
WOOFER
VHF/UHF
AC IN 75-ohm
coaxial
cable
(supplied)
Satellite receiver
Satellite
antenna
cable
(US)
US
11