DVD Player or
Receiver via AV
Use this connection if you have a digital audio device that is PCM/Dolby
Digital compatible, such as an AV Receiver with a Dolby Pro Logic system
To connect a DVD player or digital satellite receiver via AV receiver with
CENTER SPEAKER IN terminals
Using a SPEAKER cord, connect the TV's CENTER SPEAKER IN
terminals to the AV Receiver's CENTER SPEAKER OUT terminals.
Using a component video cable, connect the DVD player or Digital
Satellite Receiver's Y, P
TV. Use the HD/DVD IN 4 connections. Using an Audio cable, connect
the DVD player or Digital Satellite Receiver to the TV's AUDIO IN
If your DVD player does not have component (Y, P
you can connect the DVD player with A/V connectors, use the
connection described on page 43.
If your Digital Satellite Receiver has a HDMI connector, for best
picture quality, use the connection described on page 44.
Using an optical digital cable, connect the DVD player or Digital
Satellite Receiver's OPTICAL OUT jack to the AV Receiver's
OPTICAL IN jack.
jacks to the Y, P
jacks on the