Table of Contents
Advertisement
Both chairs face one direction
chairs face in opposite directions
ExAMPLE 4
|
7
|
ExAMPLE 3
Reconfiguration
Reconfiguring individual Guest or Patient chairs is simple. Since stand-alone
chairs have both arms and all four legs no additional parts are required.
If chairs are ganged simply remove the ganging bracket and re-position the
chairs. Reattach the ganging bracket if desired. If the chairs are connected to
a Linking Table detach the table from the chair(s). Tables are reversible. An End
Table on the left can be repositioned on the right. Or chairs flanking a Center
Table can be oriented in opposite directions.
Example 4
In the example one chair has been reversed while the table and other chair
remain unchanged.
To reduce the number of legs this configuration can be duplicated
using Aviera Multi-seating Start, Center (x3), and End elements.
Example 3
Two sets of ganged Guest chairs incorporating different size seats
linked with a table.
To reduce the number of legs this configuration can be duplicated
using Start and End elements on the left and a 2-seat Pre-Configured
or Freespan on the right.
Advertisement
Table of Contents
