Start/Center/End Multi-Seating; Assembly & Installation; Tools Required; Included Hardware - Ideon Aviera User Manual

START/CENTER/
END MULTI-SEATING
21", 24", 30" and 44" Start Elements
Start/Center/End is the most versatile multi-seating and is designed for
configurations requiring more than three seats. Seat size and back type may
be mixed. For example, three 21" seats (start/center/center) with guest backs
and one 30" seat (end) with a patient back can be configured together.
Start/Center/End multi-seating is available in four seat widths and two back
types. There is no limit to the number of Centers that can be placed between a
Start and End. Seat widths, back types and arm styles may be mixed to create
all sorts of seating.
Assembly & Installation
Start/Center/End multi-seating elements are shipped completely assembled in
the box. To create a configuration the seats must be attached together. Build
the configuration from left to right (facing the chair) beginning with the Start
section. Then add as many Centers as necessary, finishing with an End. The
instructions below show how to add Center and End elements.

Tools Required

(not included)
3/16" Allen wrench
(hex key)
21", 24", 30" and 44" Center and End Elements

Included Hardware

(applies to Center and
End elements only)
Six 5/16 x 3/4" bolt
| 10 |