Table of Contents
Advertisement
LINkING TABLES
end
10-32 x 1-½" Phillips
machine screw
(for wood legs)
or
10-32 x ¾" Phillips
machine screw
Table Type
(for metal legs)
end
4
center
0
corner 45°
0
square 90°
2
Round 90°
2
|
16
|
center
corner 45°
Tables are like bridges joining chairs and multi-seating elements. Connect like
items together or mix it up. For instance, a table can link to a Guest or Patient
chair on one side and a Pre-Configured, Freespan, Start or End element on
the other. End tables have two legs, and 90° radius and square tables have
one leg.
In a Start/Center/End configuration a table must connect to either
a Start or an End.
Assembly & Installation
Start/Center/End multi-seating elements are shipped completely assembled in
the box. To create a configuration the seats must be attached together. Build
the configuration from left to right (facing the chair) beginning with the Start
section. Then add as many Centers as necessary, finishing with an End. The
instructions below show how to add Center and End elements.
Tools Required
(not included)
Phillips screwdriver
#12 x 5/8" Phillips
#12 x 1" Phillips
wood screw
wood screw
4
4
8
8
8
8
8
8
8
8
Round 90°
Included Hardware
Hardware to attach tables to chairs is
packaged inside the table carton along
with installation instructions.
R bracket
F bracket
(for rear of chair)
(for front of chair)
1
1
2
2
2
2
2
2
2
2
square 90°
Table Leg
2
0
0
1
1
Advertisement
Table of Contents
