Faqs - Ideon Aviera User Manual

FAQs

| 25 |
Q: How can I change a configuration once it has been installed?
A: Start/Center/End configurations can be easily reconfigured with the
addition of arms or additional Start/Center/End elements.
Q: Can I add a table to the middle of a Start/Center/End configuration?
A: Only the Start and End have finished arms, so a table cannot be placed in
the middle. Instead, connect a Guest or Patient chair or Pre-Configured or
Freespan seating to both sides of a table.
Q: How much assembly is required?
A: Pre-Configured and Freespan multi-seating ship completely assembled
from the factory. Start/Center/End multi-seating requires some assembly.
Q: Can I mix guest and patient backs or different size seats?
A: Back types and seat sizes may be combined in Start/Center/End
configurations but not in Pre-Configured multi-seating.
Q: Do I need a new table if I change my configuration?
A: Linking Tables can be reversed, so that an end table on the left may be
repositioned on the right; or a table may be placed between seats facing
in opposite directions.
Q: Can I buy additional Centers or Start/End components?
A: Yes! And our accurate fabric matching ensures that patterns will line up
perfectly, even years after the initial order.
Q: How can I be sure that my order is correct?
A: After an order is received for multi-seating or seating with linking tables,
a visual Confirmation will be sent that verifies every element.