Linking To Tables; Ganging; Reconfiguration - Ideon Aviera User Manual

ExAMPLE 5
ExAMPLE 6
ExAMPLE 7
ExAMPLE 8
KEy
s – start
c – center
e - end

Linking to Tables

Tables can be connected to either side of a Start/Center/End configuration,
but not in-between. See the Linking Tables section for assembly and
installation instructions.

Ganging

Start/Center/End multi-seating can be ganged with other Start/Center/End
elements or with Pre-Configured and Freespan elements using an optional
ganging bracket.

Reconfiguration

Start/Center/End multi-seating can be reconfigured into any number of seating
solutions, provided a Start and an End are used (a Center is not required).
Example 5
A basic three-seat Start/Center/End configuration.
Example 6
The original seating reconfigured into a single chair and a 2-seater. It requires a
new right arm for the original Center component (C) and a new left arm for the
Start component (S) due to the through holes.
Additional arms can be ordered from the replacement parts section of
the current Price Guide.
Example 7
The original multi-seating is reconfigured into three stand-alone chairs through
the addition of two more arms – a right arm for the Center component and a
right arm for the End component.
The configuration shown above can be more efficiently accomplished
with stand-alone Guest or Patient chairs.
It is easy to add more center elements to create even longer seating
arrangements.
Example 8
The original configuration has been expanded by the addition of two Center
components.
| 13 |