Replacing Components - Ideon Aviera User Manual

REPLACING
COMPONENTS
| 22 |
Many Aviera components are field replaceable. Follow the steps below to
replace a back, seat or arm.
Back Replacement
Guest/Patient/Pre-Configured/Multi-Seating Chairs
1. Unzip and remove the back upholstery.
2. Remove six 5/16" bolts in the bottom rear section of the back using a
3/16" Allen key.
3. Pull off the back and replace with the new back.
4. Re-install bolts.
5. Re-attach back upholstery and close the zipper.
Freespan Chairs
1. Unzip and remove the back upholstery.
2. Remove upholstery flaps from the rear of the chair (velcro attached to
frame).
3. Remove four Phillips wood screws from the frame.
4. Slide back out of the back bracket.
5. Re-install the new back by slipping it into the slot in the frame and
pushing down.
6. Align pilot holes in back wood with those in the back bracket of the frame.
7. Re-install Phillips wood screws.
8. Wrap upholstery flaps with velcro through to the rear of the chair and attach
to frame back brackets.
9. Re-attach back upholstery and close the zipper.