Battery Status Indicator - Projecta JS900 Manual

UNDERSTANDING YOUR JUMP STARTER
CLAMP CONNECTION LED
Jump start Status
Jump starter clamps connected to vehicle and ready to jump start Green solid
Jump starting for more than 5 seconds
Battery or jump starter switch, over-temperature
Battery charging temperatures >45°C or <0°C
Short circuit
Clamps reverse connected to battery
Jump starter input voltage (EC5 connector) > 15.0V
Low voltage indication
Hardware failure

BATTERY STATUS INDICATOR

When jump starter is turned on the battery gauge LED's are displayed as follows:
State of Charge Battery Gauge LED Display
<20%
20–25%
25–50%
50–75%
75–100%
When jump starter is charging the battery gauge LED's are displayed as follows:
State of Charge Battery Gauge LED Display
<20%
20–50%
50–75%
75–99%
100%
8
– Red flashing
– Red
– Yellow
– Green
– Green
– Scrolling
– Red with Yellow & Green scrolling
– Yellow with Green scrolling
– Green with Green flashing
– All solid Green
LED
Yellow flash twice, pause & repeat
Red / Green alternate flashing
Red / Green alternate flashing & siren
Red flashing & beeping siren
Red solid & siren on
Red / Yellow alternate flashing & siren on
Red flashing, no beeping siren
Red fast flash, steady siren on