Handling Components - Matrox Morphis QxT Installation And Hardware Reference

Hide thumbs Also See for Morphis QxT:
Table of Contents

Advertisement

14 Chapter 1: Introduction
Caution
• An HD-44M-18BNC input cable, a 3-foot cable with a 44-pin male connector
at one end and eighteen BNC female type connectors at the other end. This cable
is used for analog input.

Handling components

The electronic circuits in your computer and the circuits on Matrox Morphis QxT
are sensitive to static electricity and surges. Improper handling can seriously
damage the circuits. Be sure to follow these precautions:
• Drain static electricity from your body by touching a metal fixture (or ground)
before you touch any electronic component.
• Avoid letting your clothing come in contact with the circuit boards or
components.
Before you add or remove devices from your computer, always turn off the power
to your computer and all peripherals
.

Advertisement

Table of Contents
loading

Table of Contents