Table of Contents
Advertisement
More information
Conventions
Need help?
Installation overview
The installation procedure consists of the following steps:
1. Complete the hardware installation as described in Chapter 2.
2. Complete the software installation procedure as described in the documentation
accompanying your software package.
For information on using multiple Matrox Morphis QxT boards, refer to
Chapter 3, and for in-depth hardware information, refer to Chapter 4.
If you want technical information about Matrox Morphis QxT, including
specifications and connector pinouts and descriptions, refer to Appendix B:
Technical information.
When the term Host is used in this manual, it refers to your computer.
This manual occasionally makes reference to a MIL-Lite function. However,
anything that can be accomplished with MIL-Lite can also be accomplished with
MIL, ActiveMIL, ActiveMIL-Lite, or Matrox Inspector.
If you experience problems during installation or while using this product, refer
to the support page on the Matrox Imaging web site:
www.matrox.com/imaging/support. This page provides answers to frequently
asked questions, as well as offers registered customers additional ways of obtaining
support.
If your question is not addressed and you are registered, you can contact technical
support. To do so, you should first complete and submit the online Technical
Support Request Form, accessible from the above-mentioned page. Once the
information is submitted, a Matrox support agent will contact you shortly
thereafter by email or phone, depending on the problem.
In the unlikely event of a failure, you will find the warranty and a Product Assistance
Request Form, that outlines return conditions and procedures, at the back of this
manual.
1. Most operations can be accomplished with Matrox Inspector.
Installation overview
1
15
Advertisement
Table of Contents
