Table of Contents
Advertisement
24 Chapter 2: Hardware installation
Connecting output
devices
BNC label
Signal
CH-2
P2_VID_IN
CH-3
P3_VID_IN
CH-4
P4_VID_IN
CH-5
P5_VID_IN
CH-6
P6_VID_IN
CH-7
P7_VID_IN
CH-8
P8_VID_IN
CH-9
P9_VID_IN
CH-10
P10_VID_IN
CH-11
P11_VID_IN
CH-12
P12_VID_IN
CH-13
P13_VID_IN
CH-14
P14_VID_IN
CH-15
P15_VID_IN
TRIG-0
Reserved
TRIG-1
Reserved
To connect an output device to the video output connector, use a standard HD
15-pin VGA to 5BNC monitor cable (available at your local electronic store).
Video device to connect
Analog video input for acquisition path 2.
Analog video input for acquisition path 3.
Analog video input for acquisition path 4.
Analog video input for acquisition path 5.
Analog video input for acquisition path 6.
Analog video input for acquisition path 7.
Analog video input for acquisition path 8.
Analog video input for acquisition path 9.
Analog video input for path acquisition 10.
Analog video input for path acquisition 11.
Analog video input for path acquisition 12.
Analog video input for path acquisition 13.
Analog video input for path acquisition 14.
Analog video input for path acquisition 15.
Reserved.
Reserved.
Advertisement
Table of Contents
