Safety; General; Safety Symbols And Terms - Ametek Teseo CBA Series Operation Manual

2

SAFETY

2.1

General

The amplifier described in this manual is designed to be used only by qualified
personnel. Use of the amplifier in a manner not specified in this manual may impair
the protection provided by the amplifier. Before use, inspect the amplifier for damage
which may impair safety.
There are no user-serviceable parts inside the amplifier, and any warranty is rendered
void if the seals on any covers are broken.
The following safety information is intended to protect all installers and operators, and
to prevent damage to the amplifier. It should be read and understood before installing
and operating the amplifier
2.2

Safety symbols and terms

CAUTION! statements identify conditions or practices that could result in damage to
the amplifier or other property.
WARNING! statements identify conditions or practices that could result in personal
injury or loss of life.
Note statements inform the user of important general information.
Hints and tips statements inform the user of useful information and operational
short cuts.
The following symbols appear on the amplifier and in this manual:
When used on the amplifier, warns the user of a non-ionising radiation
hazard. When used in this operation manual, alerts the user to the part of the
manual that deals with a non-ionising radiation hazard.
When used on the amplifier, directs the user to refer to the operation manual.
When used in this operation manual, alerts the user to
CAUTION! statements.
or
Ground terminal. Connect this terminal to a clean ground to improve EMC
immunity. Although it provides an extra measure of safety, this is not a
protective earth ground. The protective earth ground is the pin on the line
inlet connector.
CBA Manual: H012161 Rev: 3
Warns personnel to observe correct lifting practices.
6
WARNING! and