Transfer Of Warranty; Protection Of Warranty - Ametek Teseo CBA Series Operation Manual

This warranty does not cover damage from customer accidents, misuse, abuse,
misapplication, operation with incorrect AC voltage, operation with faulty associated
equipment, unauthorised use by third parties other than the original customer,
modification or alteration without prior factory approval, service by an unauthorised
Service Centre and performance deterioration which will occur due to normal usage.
Units on which the serial number, or anti-tamper labels, has been removed or defaced
are not eligible for warranty service. Evidence of alteration, erasing, or forgery of
proof-of-purchase documents will be cause to void the warranty.
Units damaged due to the absence of routine maintenance, as defined by TESEQ in
the product handbook, are not eligible for warranty service.
When product is to be returned for warranty service a return authorisation number
must first be obtained from TESEQ. A description of the problem, as specific as
possible, should be attached to the request for the return authorisation number.

11.4 Transfer of Warranty

This warranty can be transferred to any new owner by informing TESEQ within 30
days of ownership transfer.
TESEQ may, at its discretion, request that the amplifier is first returned to the factory,
freight prepaid, to establish the condition of the amplifier and suitability for continuing
warranty cover. Failure to notify TESEQ Ltd within 30 days will be cause to void the
warranty.

11.5 Protection of Warranty

To protect your warranty, we recommend you:
Ensure the product is serviced in accordance with the guidance laid out in the
product handbook.
Avoid unauthorised modifications to the product
Report any faults to TESEQ, or the nearest authorised dealer, as soon as they
occur.
CBA Manual: H012161 Rev: 3
29