Rs232 Connection; Usb Connection; Ground Post (8-32 Thread) - Ametek Teseo CBA Series Operation Manual

7.9

RS232 Connection

Pin Female D-Type
Pin
1 Data Carrier Detected
2 Receive (RX)
3 Transmit (TX)
4 Data Terminal Ready
5 Signal Ground
6 Data Set Ready
7 Request to Send
8 Clear to send
9 Ring Indicator
7.10

USB Connection

USB-B device connector
Pin
1 VDC (5V)
2 Receive (RX)
3 Transmit (TX)
4 Data Terminal Ready
7.11

Ground post (8-32 thread)

To improve EMC immunity, bond the amplifier to a clean ground with a
conductor of 4 sq.mm or the equivalent braid, to this post. Although it
provides an extra measure of safety, this is not a protective earth. The
protective earth is the ground pin on the line inlet connector.
CBA Manual: H012161 Rev: 3
Signal
Signal
19