Remote Command Set - Ametek Teseo CBA Series Operation Manual

8.6

Remote Command Set

Amplifier Status Commands
MODEL
SN
*IDN?
*RST
STATUS
FAULT
RESET, RE
*SCREENSHOT
Amplifier Operate Commands
ON, OP, OPRT, RFOP, RFON
OFF, STBY, OF, STB, RFOF
BAND_STATUS
BAND1
BAND2
Amplifier Pulse Commands
PULSEW
DUTYCYC
FRQNCY
PERIOD
CW_ON
PLS_ON
PLS/CW_STATUS
Amplifier Temperature Metering Commands
TEMP-BASE
TEMP-AMB
Amplifier Elapsed Time Metering Commands
TOTALH
OPERATEH
CBA Manual: H012161 Rev: 3
Display Unit Model
Display Unit Serial Number
Model, S/N, Firmware Version
Restarts the Amplifier
Display Amplifier Status Message
Display Amplifier Fault
Reset Amplifier Fault
Takes a screenshot of the display
Turns the Amplifier On
Turns the Amplifier Off
Query Current Amplifier Band
Switch to Band 1
Switch to Band 2
Display Pulse Width
Display Duty Cycle
Switch to CW Operation
Switch to Pulse Operation
Query current mode
Query the Amplifiers Base Plate
Temperature
Query the Amplifiers Ambient
Temperature
Total Amplifier ON Hours
Total Amplifier OPERATE Hours
22