General; 1�1 Information About This Manual; 1�2 Liability And Warranty; Explanation Of Symbols - IFM Electronic EFECTOR 600 TW2000 Operating Instructions Manual

1 General

1.1 Information about this manual
The Operating Manual shall enable the user to properly install the infrared tem-
perature sensor and the required accessories�
Before starting installation, be sure to read and understand this entire manual,
in particular the chapter on safety! The instructions contained in this manual,
especially those concerning safety, as well as site specific regulations governing
UV radiation must be complied with at all times� It is imperative to comply with
the safety instructions and the accident protection regulations valid for the area of
application�

Explanation of symbols

Important safety-related references in this manual are marked with a symbol�
ATTENTION
This symbol points out guidelines� If you do not observe them, the device might
be damaged, malfunctioning or even fail to operate�
CAUTION
This symbol points out hints and information which should be heeded for
efficient and trouble-free operation
► Action
This symbol instructs the operator to take action�
> Reaction, Result
This symbol indicates the result of the action taken�
1.2 Liability and Warranty
All information compiled in this manual is in accordance with applicable regula-
tions� The statements made are based on state-of-the-art technology and reflect
our ex-tensive knowledge and many years of experience�
Always carefully read this Operating Manual before beginning any work on
or with the in-strument, especially prior to installation and initial setup! The
Manufacturer shall not be held liable for any damages or malfunctions aris-
ing from a disregard of the warnings and instructions contained herein��
4