Operating Parameters; 11�1 Setting Parameters - General Information - IFM Electronic EFECTOR 600 TW2000 Operating Instructions Manual

11 Operating parameters

When you reset/adjust the operating parameters the instrument remains in run
mode� It continues to operate, using the current parameter settings, until you have
finished configuring by pressing [Enter]�
11.1 Setting parameters – general information
1
Select parameter
► Press [Enter] to access the main
menu�
2 Select output function
Press key [▼] until the required output
function is displayed�
3
Show parameter value
► Press [Enter]
> Current parameter value is dis-
played� *
* The infrared temperature sensor will display the parameter value for 30 sec� After
that the display will once again indicate the measurement as a percentage
4
Change parameter value
► Press [▲] or [▼] and hold for 3 s
> displays are first flashing, then they
are continuously lit�*
* Hold key [▲] or [▼] .
> Numerical values scroll through
rapidly
5
Confirm parameter value
► Press [Enter]
> The display indicates the param-
eter�The new value has been saved
and will take effect�
UK
17