Menu Explanation; 9�1 Main Menu; 9�2 Advanced Functions - IFM Electronic EFECTOR 600 TW2000 Operating Instructions Manual

9 Menu explanation

9.1 Main menu
Parameter Function
OUT1 Upper threshold
SP1
rP1 OUT1 Lower threshold
ASP2 OUT2 Beginning of range Analogue start value for the range of OUT2
OUT 2 End of range
AEP2
EF Advanced functions
9.2 Advanced functions
Parameter Function
Factory settings
rEs
dS1 Upper threshold delay
dr1 Lower threshold delay
Output function
ou1
uni Temperature unit
dAp Damping
Peak hold function
PhLd
EPSI Emissivity coefficient
tEst Test function
Comments
Upper threshold which activates OUT1
Lower threshold which activates OUT1
Analogue end value for the range of OUT2
select menu advanced functions
Comments
Reset to factory settings
Value in sec (≤ 10 sec in steps of 0.1 sec)
Value in sec (≤ 10 sec in steps of 0,1 sec)
Hno normally opened
Hnc normally closed
Temperature displayed in °F or °C
Damping for the temperature display,
switch outputs and analogue output
Configuration of the peak hold function
Adaptation of the radiation characteristics of
the target object�
Activates diagnostics for self-test
UK
15