16.12 Certificates And Approvals - Endress+Hauser Dosimag Modbus RS485 Operating Instructions Manual

Dosimag Modbus RS485
CE mark
C-Tick symbol
Ex approval
Sanitary compatibility
Pressure Equipment
Directive
Measuring instrument
approval
Endress+Hauser
+
-
1
1 Supply voltage 24 V DC
2 Service adapter
3 Commubox FXA291
4 Measuring device
5 Computer with "FieldCare" or "DeviceCare" operating tool
The service adapter, cable and Commubox FXA291 are not included in the delivery.
These components can be ordered as accessories →  62.

16.12 Certificates and approvals

The measuring system is in conformity with the statutory requirements of the applicable
EC Directives. These are listed in the corresponding EC Declaration of Conformity along
with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
The measuring system meets the EMC requirements of the "Australian Communications
and Media Authority (ACMA)".
The devices are certified for use in hazardous areas and the relevant safety instructions are
provided in the separate "Safety Instructions" (XA) document. Reference is made to this
document on the nameplate.
• 3A approval and EHEDG-certified
• Seals → FDA-compliant
• With the PED/G1/x (x = category) marking on the sensor nameplate, Endress+Hauser
confirms compliance with the "Essential Safety Requirements" specified in Annex I of the
Pressure Equipment Directive 97/23/EC.
• Devices not bearing this marking (PED) are designed and manufactured according to
good engineering practice. They meet the requirements of Art.3 Section 3 of the
Pressure Equipment Directive 97/23/EC. The range of application is indicated in tables 6
to 9 in Annex II of the Pressure Equipment Directive.
Dosimag is suitable as an (optional) component for recording volume in legally regulated
measuring systems for AdBlue / DEF (Diesel Exhaust Fluid) in accordance with Appendix
MI-005 of the European Measuring Instruments Directive 2014/32/EU. Dosimag is
certified in accordance with OIML R117-1:2007 / OIML R117-2:2014 and has an MID
evaluation certificate confirming conformity with the basic requirements of the Measuring
Instruments Directive.
2 3
Technical data
4
5
A0032567
73