Incoming Acceptance And Product; Identification; Incoming Acceptance; Product Identification - Endress+Hauser Dosimag Modbus RS485 Operating Instructions Manual

Incoming acceptance and product identification
12
4

Incoming acceptance and product

identification

4.1

Incoming acceptance

A0028673
1
2
A0028673
A0028673
A0028673
• If one of the conditions is not satisfied, contact your Endress+Hauser Sales Center.
• Depending on the device version, the CD-ROM might not be part of the delivery!
The Technical Documentation is available via the Internet or via the Endress+Hauser
Operations App, see the "Product identification" section →  13.
4.2

Product identification

The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is
displayed.
• Enter the serial number from the nameplates into the Endress+Hauser Operations App
or scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser
Operations App: all the information for the measuring device is displayed.
1
2
Order code:
Ser. no.:
Ext. ord. cd.:
i i
Date:
Dosimag Modbus RS485
Are the order codes on the
delivery note (1) and the
product sticker (2) identical?
Are the goods undamaged?
Do the nameplate data
match the ordering
information on the delivery
note?
Is the CD-ROM with the
Technical Documentation
(depends on device version)
and documents present?
Endress+Hauser