Verifying Post-Installation Connectivity; Mobile Application Installation - Aruba Instant On AP12 Installation Manual

2. Twist the bracket clockwise until it snaps into place in the tabs (see
Figure 11
3. Install two screws (and wall anchors if necessary), one above the other. Do not fully insert the screws into the
wall. Leave enough space between the screw head and the wall for the bracket.
4. Align the keyhole slots on the back of the bracket with the screws installed in step 3.
5. Place the larger opening on the keyhole slot over the screw and pull the AP down until it is securely attached
to the screws (see
Figure 12

Verifying Post-Installation Connectivity

The integrated LEDs on the access point can be used to verify that the access point is receiving power and
initializing successfully (see

Mobile Application Installation

Search for "Aruba Instant On" app within the Apple App Store or Google Play to download and install the Aruba
Instant On mobile app to your phone. Launch the app and follow the instructions to complete the setup. For
Aruba Instant On AP12 Access Point
Bracket Installation
Figure 12).
AP-Bracket Wall Installation
Table 1).
| Installation Guide
Figure 11).
9