Elektron Analog Four MKII User Manual page 77

4. Second method: Select Track 1 on the Analog Four MKII by pressing [TRACK 1] key.
5. On the OSC1 menu page, set the WAV parameter to IN L using DATA ENTRY knob F. Set SUB, the sub
oscillator, to off. Turn LEV all the way up.
6. Make a custom set of filtering, amplifier, envelope and LFO processing of the sound feed from the elec-
tric guitar by setting the values of your choice on the corresponding parameter menu page, [PARAME-
TER] key 3-6. Remember to set the LEV to a high value on the AMP page.
7. Place a note trig on the first step of the sequencer for Track 1. This is required to start the envelope
processing of the feed from the electric guitar.
8. Press play on the Analog Four MKII.
The three main send effects are a perfect choice when performing at large arenas. Let your
sounds expand in all dimensions of the time-space continuum with the Wideshift Chorus,
Saturator Delay, and Supervoid Reverb!
Experiment with different filter and LFO settings when sending the guitar feed through one
of the synth tracks, as outlined in the second method above. Try setting the second filter type
(TYP) to BP or HP on the FILTERS page at mid- to high cutoff frequency (FRQ). Then, experi-
ment with high low-frequency oscillation speeds (SPD) and different distortion settings (DST)
on the LFO page to produce wildly flanging or cool robotic phaser effects.
15. SETUP EXAMPLES
77