Table of Contents
Advertisement
10.8.6 ENV (F)
Controls whether the ENVF should be retrigged or not when a note trig or lock trig is activated by the
sequencer.
10.8.7 ENV (2)
Controls whether the ENV2 should be retrigged or not when a note trig or lock trig is activated by the
sequencer.
10.8.8 LFO (1)
Controls whether the LFO1 should be retrigged or not when a note trig or lock trig is activated by the
sequencer.
10.8.9 LFO (2)
Controls whether the LFO2 should be retrigged or not when a note trig or lock trig is activated by the
sequencer.
It is possible to real time record and real time erase NOT, VEL and LEN parameters. This is
useful when for example inputting notes using an external MIDI keyboard sending MIDI ve-
locity data. The same applies when entering notes using the mini-keyboard. In this case VEL
changes will not be recorded though, as the mini-keyboard is not velocity sensitive.
For more information, please see "10.12.1 PARAMETER LOCKS" on page 45.
When real time erasing all locks by pressing [FUNC] + [NO], note parameters are not included.
10.9 NOTES SETUP
In the NOTES SETUP menu, more settings relating to notes of the active track are found. Access the menu
by pressing [FUNC] + [NOTE]. Navigate in the menu using the [UP]/[DOWN] arrow keys or the TRACK
LEVEL knob. Change settings with the [LEFT]/[RIGHT] arrow keys.
10.9.1 GLOBAL QUANTIZE
Affects all micro timed trigs of all tracks. The higher the quantize value, the more all micro timed trigs will
be quantized.
10.9.2 TRK QUANTIZE
Affects all micro timed trigs of the active track. The higher the quantize value, the more all micro timed
trigs will be quantized.
10.9.3 TRK KEY SCALE
Sets the key scale of the track. All notes on the sequencer track will be auto-adjusted to the selected
scale. The setting is non-destructive, meaning if the setting is changed from for example MIN to OFF, the
notes will start playing according to their original note values. This setting also affects how the track will
be transposed. If for example MAJ is set, all notes of the track will be transposed according to a major
scale. For more information, please see "10.12.10 TRACK TRANSPOSE" on page 49.
10.9.4 TRK KEY NOTE
Sets the key note of the track. This setting affects how the track will be transposed when performing a
transpose function. The transpose will be an offset from the key note.
10.9.4 TRK TRANSPOSABLE
Will when activated make the track transposable. If deactivated, the track can not be transposed, which
can be a relevant setting for tracks containing drum sounds. A quick command for this setting exists.
Press [TRNS] + [TRACK] to activate/deactivate the transpose functionality for a track. For more infor-
mation, please see "10.12.10 TRACK TRANSPOSE" on page 49.
10. THE SEQUENCER
43
Advertisement
Table of Contents
Need help?
Do you have a question about the Analog Four MKII and is the answer not in the manual?