Technical Specifications - Homematic IP HmIP-BBL-2 Installation Instructions And Operating Manual

The range of transmission within buildings can
differ greatly from that available in the open air.
Besides the transmitting power and the reception
characteristics of the receiver, environmental
factors such as humidity in the vicinity have an
important role to play, as do on-site structural/
screening conditions.
Hereby, eQ-3 AG, Maiburger Str. 29, 26789 Leer/Germa-
ny declares that the radio equipment type [Markenname]
[Gerätekurzbezeichnung] is in compliance with Direc-
tive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.eq-3.com
13

Technical specifications

Device short description:
Supply voltage:
Current consumption:
Standby power consumption: 0.2 W
Max. switching capacity:
Load type:
Relay:
Cable type and cross section: rigid and flexible cable,
Installation:
Technical specifications
HmIP-BBL-2
230 V/50 Hz
2.2 A max.
500 VA
motor load
1x NO contact,
1x changeover contact
0.75-1.5 mm²
only in normal com-
mercial switch boxes in
43