Usb / Ethernet Port Locations On Your Brother Machine - Brother HL-J6000DW Online User's Manual
Hide thumbs
Also See for HL-J6000DW:
- Service manual (402 pages) ,
- Quick setup manual (2 pages) ,
- Reference manual (20 pages)
Table of Contents
Advertisement
Home >
Introduction to Your Brother Machine
USB / Ethernet Port Locations on Your Brother Machine
The USB and Ethernet ports are located inside the machine.
•
When connecting the USB or Ethernet cable, follow the instructions in the installation process.
•
To install the Full Driver & Software Package necessary for operating your machine, insert the Brother
installation disc into your computer, or go to your model's Downloads page on the Brother Solutions
Center at support.brother.com.
1. Place both hands under the plastic tabs on both sides of the machine to lift the top cover (1) into the open
position.
2. Locate the correct port (based on the cable you are using) inside the machine as shown.
Carefully guide the cable through the cable channel and out the back of the machine.
3. Gently close the top cover using both hands.
> USB / Ethernet Port Locations on Your Brother Machine
1
16
Advertisement
Table of Contents
