Configure Active Directory ® Authentication Using Web Based Management - Brother HL-J6000DW Online User's Manual

Home > Security > Use Active Directory
Web Based Management
Configure Active Directory
Management
®
Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must
configure the SNTP protocol (network time server) and DNS server configuration for authentication.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
4. Click the Administrator tab.
5. Click the User Restriction Function menu in the left navigation bar.
6. Select Active Directory Authentication.
7. Click Submit.
8. Select the Active Directory Authentication menu in the left navigation bar.
9. Configure the following settings:
Option
Remember User ID
Active Directory Server
Address
Active Directory Domain
Name
Protocol & Authentication
Method
LDAP Server Port
10. Click Submit.
Related Information
• Use Active Directory
®
Authentication
®
Authentication Using Web Based
Description
Select this option to save your User ID.
Type the IP address or the server name (for example: ad.example.com)
of the Active Directory
Type the Active Directory
Select the protocol and authentication method.
Type the port number to connect the Active Directory
(available only for LDAP + kerberos authentication method).
®
Authentication
> Configure Active Directory
.
®
Server.
®
domain name.
®
Authentication Using
®
server via LDAP
152