Brother HL-J6000DW Online User's Manual page 354

Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
WLAN TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device
Information
Level 3 Level 4 Descriptions
APIPA -
IPv6 -
- -
- -
- -
BOOT Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server -
DNS Server -
APIPA
-
IPv6 -
- -
- -
- -
- -
Status -
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
Device Name -
SSID -
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Select the Boot method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off.
Configure your wireless network settings
manually.
Configure your wireless network settings
using the Brother installation disc.
Configure your wireless network settings
using the one-button push method.
Configure your wireless network settings
using WPS with a PIN.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network
settings using the one-button push
method.
Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
Configure your Wi-Fi Direct network
settings manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
349