Brother HL-J6000DW Online User's Manual page 353

Level 1 Level 2
Quiet Mode -
Beep -
LCD Settings Backlight
Dim Timer
Keyboard -
Settings
Sleep Mode -
Auto Power Off -
[Printer]
[Settings] > [All Settings] > [Printer]
Level 1 Level 2
Emulation -
Print Options Font List
Test Print
2-sided 2-sided Print -
HP Tray Command -
Reset Printer -
[Network]
[Settings] > [All Settings] > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Level 3
-
-
-
-
-
-
-
Level 3 Descriptions
- Select the emulation mode.
HP LaserJet Print a list of the machine's internal fonts.
BR-Script 3
- Print a test page.
Enable or disable 2-sided printing and choose long edge or
short edge.
- Select the correct version of HP LaserJet emulation.
- Restore the printer settings to the factory settings.
Level 3
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
Descriptions
Decrease printing noise.
Adjust the beeper volume.
Adjust the brightness of the LCD backlight.
Set how long the LCD backlight stays on after the
last finger press.
Select the type of keyboard for the LCD.
Select how long the machine must be idle before it
goes into Sleep Mode.
Select how long the machine must wait before it
automatically turns itself off after entering Sleep
Mode.
When set to Off, the machine will not power off
automatically.
Level 4 Descriptions
- Select the Boot method that best suits
your needs.
- Enter the IP address.
- Enter the Subnet mask.
- Enter the Gateway address.
- Enter the Node name.
- Select the WINS configuration mode.
- Specify the IP address of the primary or
secondary WINS server.
- Specify the IP address of the primary or
secondary DNS server.
348