Brother HL-J6000DW Online User's Manual page 36

Home > Paper Handling
#3 > Load Photo Paper in Paper Tray #1
Load Photo Paper in Paper Tray #1
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message
appears on the LCD asking if you want to change the paper type and paper size.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select
has been set in the machine or printer driver.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2
2. Pull the paper tray completely out of the machine as shown by the arrow.
3. Do one of the following:
• If you load Photo L (9 x 13 cm) in the paper tray, lift up the Photo L stopper (1).
• If you load Photo (10 x 15 cm) in the paper tray, lift up the Photo stopper (2).
• If you load Photo 2L (13 x 18 cm) in the paper tray, lift up the Photo 2L stopper (3).
Gently press and slide the paper width guides (4) to fit the paper size.
1
2
3
4. Load up to 20 sheets of photo paper in the paper tray with the printing surface face down.
Loading more than 20 sheets of photo paper may cause paper jams.
> Load Paper > Load Paper in Paper Tray #1 / Paper Tray #2 / Paper Tray
1
4
31