Analog Devices ADSP-SC589 EZ-Board Manual page 17

Navigate to the CCES environment through the
to the target board.
Use the Debug Configurations wizard to connect to the EZ-Board. If a debug configuration
exists already, select the appropriate -configuration and click
To create a debug configuration, do one of the following:
Click the down arrow next to the bug icon
Choose Run > Debug Configurations
The Debug Configuration
Select Application with CrossCore Debugger
The Select Processor
Ensure SHARC
Click Next . The
Select Emulator
The Select Platform
Choose the type of emulator that is connected to the EZ-Board.
Click Finish
Debug Configurations list.
In the Name edit box, users can select an appropriate name to describe the configuration,
otherwise a default name is provided.
In the Program(s) to load
not already populated) when connecting to the board. If not loading any program upon
connection to the target, do not make any changes.
NOTE: Notice that by default there is an application loaded to Core 0 that is not the application
created by the user. This is a preload application that is used to set up external memory since Core 0
applications are loaded to L3 memory by default. This preload can be changed if needed but will work
for most applications. User applications loaded after a preload should NOT reset as they may undo
some of what the preload has already set up.
While connected to the target, there is no way to choose a program to download. To load a
program once connected, terminate the session and then load the new program.
To delete a configuration, go to the
configuration to delete. Click
launch configuration. Then
ADSP-SC589 EZ-Board® Evaluation System Manual
dialog box appears.
page of the
is selected in Processor family
Select Connection Type
and click Next .
page of the Session Wizard
to close the wizard. The new debug configuration is created and added to the
section, choose the program to load (if the appropriate program is
and choose
Close
Start menu. Note that CCES is not connected
, select
.
and click
Session Wizard appears.
. In Processor type
page of the
appears.
Debug Configurations
Yes when asked if you wish to delete the selected
the dialog box.
Debug . Go to step 8.
Debug Configurations
(New launch configuration)
, select
Session Wizard appears.
dialog box and select the
.
.
ADSP-SC589 .
17