Playback
This section describes the connections and settings for
playback and functions such as playback at various
speeds, and searching for a specific scene on a recorded
tape.
Connections for Playback
Connecting the unit to a monitor without
an i.LINK jack
You can connect the unit to a video monitor/recorder
without an i.LINK jack. Connect video cables and audio
cables as shown below. For each jack, see page 12.
Monitor/recorder
To audio input
To video input
To S-video input
To component video input
Audio cable (not supplied)
Video cable (not supplied)
S-video cable (not supplied)
Component video cable
(not supplied)
HVR-M15A
(rear panel)
: Signal flow
Chapter 2 Playback and Recording
(Continued)
29