Software Installation; Standard Delivery; General - DURKOPP ADLER 540-100-1 Manual Complete

9.

Software installation

9.1 Standard delivery

9.2 Software installation
9.2.1

General

With delivery of the sewing automat only the test software is installed
in the control unit, which allows the loading of specific sewing software
from the boot-dongle. The boot-dongle is in the machine head
accessories pack.
CAUTION!
Only use the boot-dongle, that comes with the machine head.
Using a dongle that contains the software of another machine class
can cause damage to the sewing automat!
Loading a specific sewing software in the DACIII control unit is
possible with the help of the "Programmed Dongle". The "Programmed
Dongle" has a label indicating the class and software version.
Such a loading (booting) may be used in order to provide several
DACIII control unit with a sewing software (first installation) or to install
a newer machine software (update).
With the delivery of the machine only the test software (allowing the
loading of sewing software) is installed in the control unit.
The test software offers no further functions. If the test software gets
damaged during the loading process, it is no longer possible to load a
software using a dongle.
In such a case use a PC with a loader cable.
The detailed procedure for this is described at the homepage of
Dürkopp Adler AG "www.duerkopp-adler.com" among the section of
"Download Area" and "Software".
CAUTION !
Turn off the main switch before connecting the dongle.
2
21