Setting Buttonhole Seam - DURKOPP ADLER 540-100-1 Manual Complete

5.6 Setting buttonhole seam

The following parameters can be changed for the buttonhole seam section:
Intermediate material
width P4.1
Stitch distance within
the buttonhole seam
P4.2
Buttonhole width
P4.3
Buttonhole seam
tension P4.4
Cutting
P4.5
Length in front of the
cut P4.6
Length behind the cut
P4.7
Cut correction x
P4.8
Correction right side
P4.9
In the program menu "Buttonhole seam"
Select program menu Buttonhole seam
–
Press the P-key.
Select the line "Buttonhole seam" with the arrow keys ñ and ò.
–
–
Press the OK-key.
Select the relevant line with the arrow keys ñ and ò.
–
–
Press the OK-key. The curser blinks under one of the digit values.
Change between the digits with the arrow keys ï and ð.
–
–
Increase or decrease the value of the chosen digit with the arrow
keys ñ and ò.
–
Press the OK-key to confirm. Press the ESC-key.
- 1,0...+1,0 mm
0,3...1,5 mm
1,6...6,0 mm
on;off
on;off
-P6.3...5,9 mm
(1.8 mm - P7.3)-
5,9 mm
-0,5...+0,5 mm
Distance between the inner stitches of the
buttonhole seam.
Distance in the y-axis of a double stitch.
Overall width of a buttonhole (outer stitches).
on: additional thread tension on (raised-form)
off: additional thread tension off (flat-form)
on: cutting during the sewing cycle
off: no cutting
1. Correction of the position of the first tack in
relation to the end of the cut
2. Additional buttonhole length in front of the
cut with asymmetrical cutting within the
buttonhole.
1. Correction of the position of the first tack in
relation to the end of the cut
2. Additional buttonhole seam length behind
the cut with asymmetrical cutting within the
buttonhole.
Position of the cut within the buttonhole on the
x-axis.
Correction of the right sided buttonhole seam
width, only visible with bartack type A (Cross
bartack).
1
31