4.4.3.1 Dongle contents
4.4.3.2 Submenu Loading
No.
Parameter name
T3.5.2.1 Machine data
T3.5.2.2 All buttonhole data
T3.5.2.3 Individual buttonholes
16
Data dongle connected
If a data dongle is plugged in, all 50 buttonhole programs or all 16 free
contours respectively are displayed.
Buttonhole programs are named as follows:
Upper bartack type-Cutting length-Lower bartack type.
The corresponding bartack shape is shown in the display.
e.g.:
A14.2A
("A" means straight bartack and "14.2" the cutting length)
In case of free contours the name is given when programming the
contour on the PC.
Press the ð key in order to switch between buttonhole programs
–
and free contours.
Machine dongle connected
The following machine software data are displayed:
Class, subclass, version and date.
e.g.:
Class:
540
Subclass: 100
Version:
A01
Date:
01/01/04
Description
After a confirmation all machine data are
loaded.
-
All global parameters (except:
Reference switch position x+y, cage length and
width, knife length, calibration values thread
tension)
- All buttonhole data
- All sequences
- Free contours (automatically the first two free
contours on the dongle.
Selection of the further 14 free contours
via menu item "Free contours" T3.5.2.4)
After a confirmation the following is loaded:
- All buttonhole data
- All sequences
Free contours are not loaded!
The 50 buttonhole program locations of the
dongle are displayed.
- Select the buttonhole program to be loaded
with the cursor keys ñ and ò. When selected
the buttonhole number can be given on the
machine (1 to 50). Press the key
- P in order to copy the selected buttonhole
program to the machine.
Confirmation:
"Yes" - the buttonhole program is copied
"No" - back to the submenu Loading