DURKOPP ADLER 540-100-1 Manual Complete page 156

6.2 Submenu basting stitches
Seam cycles
P9.1
Stitch length
P 9.2
Thread tension
P 9.3
6.3 Submenu Zigzag
Seam cycles
P10.1
Stitch length
P 10.2
Buttonhole width
P10.3
Speed
P10.4
Thread tension
P 10.5
Thread tension
P 10.6
38
0 / 1
0.3 ... 3.0 mm
0...100%
1 / 2
0.3 ... 3.0 mm
1.0...P4.3
200 ... 4000 RPM
0...100%
0...100%
Number of the basting stitch seam cycles
Stitch length of the basting stiches
Value of the tread tension for basting stitches.
This parameter can only be selected when
electric thread tension control is available.
Number of the zigzag seam cycles
Stitch length of the first zigzag. Only visible
when the number of zigzag seam cycles = 2
The buttonhole width for the first zigzag < _ max.
buttonhole width P4.3.
Only visible when the number of zigzag seam
cycles = 2
The sewing speed of the first zigzag.
Thread tension for the leading buttonhole seam
of the first zigzag. Only visible when the
number of zigzag seam cycles = 2
This parameter can only be selected when
electric thread tension control is available.
Thread tension for the trailing buttonhole seam
of the first zigzag. Only visible when the
number of zigzag seam cycles = 2
This parameter can only be selected when
electric thread tension control is available.